R-Loc Features

• Full hard, tensile strength steel manufactured to ASTM A792 Grade 80 specifications for Galvalume. Minimal tensile strength of 80,000 PSI.
• UL 90 rating UL 2218/Class 4 impact resistance rating to withstand the most severe weather including ice, driving wind or snow
• 1 1/4″ tall major ribs, which are 1″ wide at the top and 3 3/32″ wide at the base, provide excellent strength and leak resistance
• Purlin bearing rib provides extra support at the lap for improved leak resistance
• Recommended for 1:12 or greater roof slopes, and ideal for low pitch commercial roofs
• Industry standard configuration allows maximum purlin spacing for cost-effective building
• Heavy, hot-dipped zinc-aluminum coating on all bare and painted products for maximum corrosion and edge protection, low maintenance and durability
• Acrylic coating on bare panel improves the performance and applicability of the unpainted Galvalume sheet. No oils are applied, making installation safer and easier.
• Available in up to 14 attractive and durable colors with a 30-year limited warranty.

NOTE: Zinc-aluminum coating on prime material only.

Standard Description

Panel Rib Height: 1 1/4″

Panel Coverage: 36″

Panel Thickness: .0185″ min.

Panel Length: 36″ to 45′ in .5″ increments

Substrate: Galvalume

Gauge: 26-gauge minimum

Minimum Roof Slope: 1/2:12 pitch

Valspar 10S baked on siliconized polyester paint system (40 year warranty)

20 year Galvalume substrate warranty